124 Version 1.21
EDIT PROGRAM
s5000
/
s6000
FILTER ENVELOPE
Pressing FILTER ENVELOPE in either the MAIN or KEYGROUP page will show this screen:
The parameters and window functions are identical to the AMP ENVELOPE described on the
pervious pages except....
FILTER This takes you directly to the FILTER page.
ENV DEPTH This sets the output level of the FILTER ENVELOPE.
Set to +000, it will have no effect on the filter or on anything else it may
be routed to in the APM modulation matrix.
NOTE: If you are using the FILTER ENVELOPE as a mod source elsewhere in the APM
modulation matrix (for example, if the filter envelope is being used to control, say, pitch), a
value other than +000 needs to be set here otherwise you will not hear the pitch sweep effect.
However, because this parameter also sets the level for the ‘hardwired’ link to the filter, setting
a value appropriate to the pitch sweep effect you want will also affect filter modulation which
may or may not be what you want.
To Next Page
Loading...
Need help?
General
