20 Version 1.21
INTRODUCTION
s5000
/
s6000
TOOLS MENUS
In most of the pages, you will find a ‘tools’ key on F9 that offers a drop down menu with further
functionality.
For example, in MULTI mode with a part selected, you have a PART TOOLS menu. Pressing this
would cause this drop down menu to appear:
In all cases, you will see that there is a certain consistency.
• F9 is always CLOSE TOOLS.
• F10 is always GET INFO and will show details of the selected item.
• F12 will always take you to a list of the selected item type (multi, program, sample).
• F13 is always QUICKLOAD which allows you to quickly load items relevant to the selected
mode (i.e. load multis, programs, samples).
• F14 is always QUICKSAVE which allows you to quickly save items relevant to the selected
mode (i.e. save multis, programs samples).
• F15 and F16’s functions change according to context.
NOTE: The LOAD and SAVE modes differ slightly in this respect. Please refer to those sections
for more details.
We will see these tools menus in each modes’ respective sections.
To Next Page
Loading...
Need help?
General
