Akai S6000 User Manual

Version 1.21 239
s5000 / s6000 UTILITIES
LOADING OPERATING SYSTEMS
There will be occasions when you want to install an operating system. This may be to re-install a
backup O/S created using SAVE O/S described on the preceding page or to install a new operating
system as they are released.
To load an operating system, with the sampler switched off, simply insert the floppy disk into the
disk drive and power on. The screen will be blank and all the mode keys will illuminate. You will
also see the floppy disk drive working.
After about 35 seconds, you will see this screen:
The sampler is setting up the SCSI bus.
After this is done, you will receive this prompt:
You should respond accordingly.

Akai S6000 Specifications

General

Type	Sampler
Polyphony	128 voices
Bit Depth	16-bit
Filters	Multi-mode resonant filters
LFO	Yes
MIDI	In, Out, Thru
Storage	SCSI
Display	LCD
Connectivity	SCSI
Outputs	8 individual outputs, stereo out
Formats	WAV, AIFF, Akai S1000/S3000
Memory	Up to 256 MB
Inputs	2 analog