Akai S6000 User Manual

158 Version 1.21
EDIT SAMPLE s5000 / s6000
XFADE LENGTH This allows you to set the crossfade length. The longer the crossfade,
the more the second sample is pulled back into the first. For example:
No crossfade
SAMPLE A SAMPLE B
6 seconds
1 Second Crossfade
SAMPLE A SAMPLE B
5 seconds
XFADE CURVE This allows you to select a crossfade curve. The choices are LINEAR,
LOG and SINE.
Pressing JOIN SAMPLES (F16) will pop-up the usual progress display followed by the PLAY/
KEEP ORIGINAL/NEW/BOTH and RENAME prompt. However you will note a slight difference in
the ‘keep’ prompt:
The options are basically the same and you can compare the new sample with the originals but
because there are two originals with this process, you have the opportunity to play each one
before deciding to keep or discard them. If in doubt, press KEEP ALL and decide what to do with
the originals afterwards.

Akai S6000 Specifications

General

Type	Sampler
Polyphony	128 voices
Bit Depth	16-bit
Filters	Multi-mode resonant filters
LFO	Yes
MIDI	In, Out, Thru
Storage	SCSI
Display	LCD
Connectivity	SCSI
Outputs	8 individual outputs, stereo out
Formats	WAV, AIFF, Akai S1000/S3000
Memory	Up to 256 MB
Inputs	2 analog