Alcatel-Lucent Enterprise ALE-500 - Page 86

Accessories
8AL91446ENAA ed02 86 /113
If you are not going use the handset for a long time, we recommend to switch off the device and
disconnect the battery.
5.2.2 Unboxing
• ALE-160 WB Cordless Handset.
• Battery pack placed on the handset.
• Safety and regulatory instructions.
5.2.3 LED
The LEDs are placed on the top of the handset and over the microphone (synchronized, same
meaning). Blue, red and purple colors are used to inform you about the status of the handset.
Handset not paired
Steady purple
Pairing mode, waiting for connection
Fast blinking red and blue
Idle state, not charging
Switched off
Incoming call (the phone is ringing)
Blinking blue
In conversation
Steady blue
Microphone switched off (mute)
Steady red
Out of coverage
Flashing red
Start charging
Blue then switched off
Low battery
slow blinking red
Upgrading
Slow blinking blue
Successful/missed upgrade
Fast blinking blue (sucessfully)/ red (missed)
during 5s