EasyManua.ls Logo

Alcatel-Lucent 7750 SR OS Basic

Alcatel-Lucent 7750 SR OS Basic
484 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Root Commands
7750 SR OS Basic System Configuration Guide Page 105
-------------------------------------------------------------------------------
Transmitted : Pkts - 0 Octets - 0
Received : Pkts - 0 Octets - 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Transmitted : Pkts - 0 Octets - 0
Received : Pkts - 0 Octets - 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Transmitted : Pkts - 0 Octets - 0
Received : Pkts - 0 Octets - 0
===============================================================================
A:ALA-12>monitor>router>mpls#
lsp-egress-statistics
Syntax lsp-egress-stats lsp-name [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>mpls
Description This command displays egress statistics for LSP interfaces at the configured interval until the config-
ured count is reached.
Default no lsp-egress-statistics
Parameters repeat repeatSpecifies how many times the command is repeated.
Values 10
Values 1 — 999
interval secondsSpecifies the interval for each display, in seconds.
Values 10
Values 3 — 60
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
of the delta.
Sample
B:Dut-C-cpm2# monitor router mpls lsp-egress-stats sample repeat 3 interval 10 abso-
lute
===============================================================================
Monitor egress statistics for MPLS LSP "sample"
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
LSP Name : sample
-------------------------------------------------------------------------------
Collect Stats : Enabled Accting Plcy. : 5
Adm State : Up PSB Match : True

Table of Contents

Related product manuals