System Management
7750 SR OS Basic System Configuration Guide Page 323
d: This mode corresponds to scaling and feature set associated with iom3-xp.
If the chassis mode is not explicitly provisioned in the configuration file, the chassis will come
up in chassis mode a by default. The behavior for the IOMs is described in the following table:
force — Forces an upgrade from mode a to mode b or d, or an upgrade from mode b to mode d.
clli-code
Syntax clli-code clli-code
no clli-code
Context config>system
Description This command creates a Common Language Location Identifier (CLLI) code string for the 7750 SR-
Series router. A CLLI code is an 11-character standardized geographic identifier that uniquely
identifies geographic locations and certain functional categories of equipment unique to the
telecommunications industry.
No CLLI validity checks other than truncating or padding the string to eleven characters are
performed.
Only one CLLI code can be configured, if multiple CLLI codes are configured the last one entered
overwrites the previous entry.
The no form of the command removes the CLLI code.
Default none — No CLLI codes are configured.
Parameters clli-code — The 11 character string CLLI code. Any printable, seven bit ASCII characters can be
used within the string. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes. If more than 11 characters are entered, the string is
truncated. If less than 11 characters are entered the string is padded with spaces.
Table 32: Chassis Mode Behavior
IOM Behavior
iom-20g-b Comes online if provisioned as iom-20g or iom-20g-b.
iom2-20g Comes online if provisioned as iom-20g, iom-20g-b or iom2-20g.
iom-10g Comes online if provisioned as iom-10g.
iom3-xp Comes online if provisioned as iom3-xp.
To Next Page
Loading...
