System Management
7750 SR OS Basic System Configuration Guide Page 411
connection request : 4
connection accept : 24
connections established (including accepts) : 27
connections closed : 26 (including 2 drops)
embryonic connections dropped : 0
segments updated rtt : 338742 (of 338747 attempts)
retransmit timeouts : 75
connections dropped by rexmit timeout : 0
persist timeouts : 0
keepalive timeouts : 26
keepalive probes sent : 0
connections dropped by keepalive : 1
pcb cache lookups failed : 0
===============================================================================
A:ALA-12#
cpu
Syntax cpu [sample-period seconds]
Context show>system
Description This command displays CPU utilization per task over a sample period.
Parameters sample-period seconds — The number of seconds over which to sample CPU task utilization.
Default 1
Values 1 — 5
Output System CPU Output — The following table describes the system CPU output fields.
Sample Output
A:ALA-1# show system cpu sample-period 2
=========================================
CPU Utilization (Test time 2001135 uSec)
=========================================
Name CPU Time CPU Usage
(uSec)
-----------------------------------------
Table 33: Show System CPU Output Fields
Label Description
CPU Utilization
The total amount of CPU time.
Name
The process or protocol name.
CPU Time (uSec)
The CPU time each process or protocol has used in the specified time.
CPU Usage
The sum of CPU usage of all the processes and protocols.