Show Commands
Page 412 7750 SR OS Basic System Configuration Guide
System 3465 0.34%
Icc 1349 0.13%
RTM/Policies 0 0.00%
OSPF 61 ~0.00%
MPLS/RSVP 2113 0.21%
LDP 19 ~0.00%
IS-IS 0 0.00%
RIP 21 ~0.00%
VRRP 0 0.00%
BGP 0 0.00%
Services 155 0.01%
IOM 24337 2.43%
SIM 4892 0.49%
CFLOWD 34 ~0.00%
Idle 961064 96.34%
=========================================
A:ALA-1#
cron
Syntax cron
Context show>cron
Description This command enters the show CRON context.
action
Syntax action [action-name] [owner action-owner] run-history run-state
Context show>cron#
Description This command displays cron action parameters.
Parameters action action-name — Specifies the action name.
Values maximum 32 characters
owner action-owner — Specifies the owner name.
Default TiMOS CLI
run-history run-state — Specifies the state of the test to be run.
Values executing, initializing, terminated
Output The following table describes the show cron action output fields.
Label Description
Action
Displays the name of the action.