Alcatel-Lucent 7750 SR OS Basic

System Management
7750 SR OS Basic System Configuration Guide Page 319
System Information Commands
atm
Syntax atm
Context config>system
Description This command enables the context to configure system-wide ATM parameters.
atm-location-id
Syntax atm-location-id location-id
Context config>system
Description This command indicates the location ID for ATM OAM.
Refer to the 7750 SR OS Services Guide for information about ATM QoS policies and ATM-related
service parameters.
Default no atm-location-id
Parameters location-id — Specify the 16 octets that identifies the system loopback location ID as required by the
ATM OAM Loopback capability. This textual convention is defined in ITU-T standard I.610.
Invalid values include a location ID where the first octet is : 00, FF, 6A
Acceptable location-ids include values where the first octet is: 01, 03
Other values are not accepted.
Values 01:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
oam
Syntax oam
Context config>system>atm
Description This command configures system-wide ATM parameters.