Common Configuration Tasks
Page 252 7750 SR OS Basic System Configuration Guide
Coordinates
Use the optional coordinates command to specify the GPS location of the device. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
coordinates coordinates
Example
: config>system# coordinates "N 45 58 23, W 34 56 12"
The following example displays the configuration output of the general system commands:
output sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
. . .
exit
----------------------------------------------
A:ALA-12>config>system#
To Next Page
Loading...
Need help?
General
