Alcatel-Lucent 7750 SR OS Basic

System Management
7750 SR OS Basic System Configuration Guide Page 283
Configuring ATM System Parameters
The ATM context configures system-wide ATM parameters.
CLI Syntax: config>system#
atm
atm-location-id location-id
oam
loopback-period period
retry-down retries
retry-up retries
Example
:config>system# atm
config>system>atm# atm-location-id 03:00:00:00:00:00:00:00:00:00:
00:00:00:00:00:00
config>system>atm# oam
config>system>atm>oam# loopback-period 30
config>system>atm>oam# retry-down 5
config>system>atm>oam# retry-up 3
config>system>atm>oam# exit
The following example shows the ATM configuration.
A:ALA-12>config>system>atm# info
----------------------------------------------
atm-location-id 03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
oam
retry-up 3
retry-down 5
loopback-period 30
exit
----------------------------------------------
A:ALA-12>config>system>atm#