Alcatel-Lucent 7750 SR OS Basic User Manual

System Management
7750 SR OS Basic System Configuration Guide Page 251
Contact
Use the contact command to specify the name of a system administrator, IT staff member, or
other administrative entity.
CLI Syntax: config>system
contact contact-name
Example
: config>system# contact “Fred Information Technology”
Location
Use the location command to specify the system location of the device. For example, enter the
city, building address, floor, room number, etc., where the router is located.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
location location
Example
: config>system# location “Bldg.1-floor 2-Room 201”
CLLI Code
The Common Language Location Code (CLLI code) is an 11-character standardized geographic
identifier that is used to uniquely identify the geographic location of a 7750 SR-Series router.
Use the following CLI command syntax to define the CLLI code:
CLI Syntax: config>system
clli-code
clli-code
Example: config>system# clli-code abcdefg1234

Alcatel-Lucent 7750 SR OS Basic Specifications

General

Brand	Alcatel-Lucent
Model	7750 SR OS Basic
Category	Network Router
Language	English