Alcatel-Lucent 7750 SR OS Basic User Manual

System Management
7750 SR OS Basic System Configuration Guide Page 465
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Defaulted power supply type : none
Status : not equipped
Power supply number : 2
Defaulted power supply type : dc
Status : up
=====================================================
B:Dut-D#
ALA-4# show chassis environment
=============================================================================
Chassis Information
=============================================================================
Environment Information
Number of fan trays : 1
Number of fans : 2
Fan tray number : 1
Status : up
Speed : half speed
=============================================================================
ALA-4#
synchronization
Syntax synchronization
Context show>redundancy>synchronization
Description This command displays redundancy synchronization times.
Output Synchronization Output — The following table describes redundancy synchronization output
fields.
Table 46: Show Synchronization Output Fields
Label Description
Standby Status Displays the status of the standby CPM.
Last Standby
Failure
Displays the timestamp of the last standby failure.
Standby Up Time
Displays the length of time the standby CPM
has been up.
Failover Time Displays the timestamp when the last redundancy failover occurred
causing a switchover from active to standby CPM. If there is no redun-
dant CPM card in this system or no failover has occurred since the sys-
tem last booted, the value will be 0.

Alcatel-Lucent 7750 SR OS Basic Specifications

General

Brand	Alcatel-Lucent
Model	7750 SR OS Basic
Category	Network Router
Language	English