File Management Commands
Page 188 7750 SR OS Basic System Configuration Guide
primary-config
Syntax primary-config file-url
no primary-config
Context bof
Description This command specifies the name and location of the primary configuration file.
The system attempts to use the configuration specified in primary-config. If the specified file cannot
be located, the system automatically attempts to obtain the configuration from the location specified
in secondary-config and then the tertiary-config.
Note that if an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the primary-config configuration.
Default none
Parameters file-url — The primary configuration file location, expressed as a file URL.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
primary-image
Syntax primary-image file-url
no primary image
Context bof
Description This command specifies the primary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this
fails, the system attempts to load the runtime images from the location configured in the secondary-
image. If the secondary image load fails, the tertiary image specified in tertiary-image is used.
All runtime image files (cpm.tim & iom.tim) must be located in the same directory.
The no form of the command removes the primary-image configuration.
Default none
Parameters file-url — The location-url can be either local (this
CPM) or a remote FTP server.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
To Next Page
Loading...
Need help?
General
