File Management Commands
Page 192 7750 SR OS Basic System Configuration Guide
The no form of the command disables the autonegotiate feature on this port.
autonegotiate — Autonegotiation is enabled on the management Ethernet port.
Parameters limited — Specifies ethernet ports to be configurable to use link autonegotiation but with only a
single speed/duplex combination advertised. This allows a specific speed/duplex to be guaran-
teed without having to turn off autonegotiation, which is not allowed for 1000BASE-T.
duplex
Syntax duplex {full | half}
Context bof
Description
This command configures the duplex mode of the
CPM management Ethernet port when
autonegotiation is disabled in the running configuration and the Boot Option File (BOF).
This configuration command allows for the configuration of the duplex mode of the
CPM Ethernet
interface. If the port is configured to autonegotiate this parameter will be ignored.
Default duplex full — Full duplex operation.
Parameters full — Sets the link to full duplex mode.
half — Sets the link to half duplex mode.
li-local-save
Syntax [no] li-local-save
Context bof
Description This command enables the lawful intercept (LI) configuration to be saved locally.
li-separate
Syntax [no] li-separate
Context bof
Description This command enables separate access to lawful intercept (LI) information.