Show Commands
Page 200 7750 SR OS Basic System Configuration Guide
boot-messages
Syntax boot-messages
Context show
Description This command displays boot messages generated during the last system boot.
Output Show Boot Messages Fields — The following output shows boot message output fields.
Sample Output
ALA-## show boot-messages
Boot log started on CPU#0
Build: X-1.2.B1-7 on Mon Jul 14 14:49:23 2003 by builder
CPUCTL FPGA version: 2A
Forcing BDB controller to HwSlot 0
Performing Power on Diagnostics
>>>Testing mainboard FPGA chain...
JTAG chain length = 2
All requested FPGAs on chain programmed
>>>Validating SDRAM from 0x21f00000 to 0x22000000
>>>Testing SDRAM from 0x02200000 to 0x21f00000
>>>Testing Compact Flash 1... Slot Empty
>>>Testing Compact Flash 2... Slot Empty
>>>Testing Compact Flash 3... OK (TOSHIBA THNCF128MBA)
Wales peripheral FPGA version is 0x13
Hardware Slot 31
Card type in EEPROM is 0x6, 'england_r1'
MDA #1: HwType 0x02, 'denmark_r1', Serial Number 'de3-52'
MDA #2: HwType 0x16, 'hungary_ds3_e3_12_r1', Serial Number 'hun01-02'
Board Serial Number is 'eng02-15'
Chassis type 4 (sr1) found in BP 1 EEProm
Chassis Serial Number is '0203210096'
JTAG chain length = 2
All requested FPGAs on chain programmed
Searching for boot.ldr on local drives:
Searching cf3 for boot.ldr...
********************************************************
Loaded 0x001bc191 bytes from cf3 to 0x80400000
Decompressing to address 0x0a000000
Starting code...
Total Memory: 512MB Chassis Type: sr1 Card Type: england_r1
TiMOS-L-1.2.B1-7 boot/hops/T2.02 Copyright (c) 2000-2003 Alcatel, Inc.
Built on Mon Jul 14 15:15:25 2003 by builder in /rel1.2/b1/B1-7/panos/main
TiMOS BOOT LOADER
Time from clock is THU AUG 14 08:39:03 2003 UTC
Error: could not open boot messages file.
Boot messages will not be stored.
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:
primary-image ftp://vxworks:vxw0rks@192.168.15.1/./rel/0.0/I129
primary-config cf3:/config.cfg
To Next Page
Loading...
Need help?
General
