System Management
7750 SR OS Basic System Configuration Guide Page 385
location
Syntax location [cf1: | cf2: | cf3:]
no location
Context config>system>persistence>sub-mgmt
config>system>persistence>dhcp-server
Description This command instructs the system where to write the file. The name of the file is: dhcp-
persistence.db. On boot the system scans the file systems looking for dhcp-persistence.db, if it finds it
it starts to load it.
In the subscriber management context, the location specifies the flash device on a CPM card where
the data for handling subscriber management persistency is stored.
The no form of this command returns the system to the default. If there is a change in file location
while persistence is running, a new file will be written on the new flash, and then the old file will be
removed.
Default no location
To Next Page
Loading...
