System Management
7750 SR OS Basic System Configuration Guide Page 423
RTM/Policies No limit 5,242,912 5,242,912 3,944,104
OSPF No limit 3,145,728 3,145,728 2,617,384
MPLS/RSVP No limit 9,769,480 9,769,480 8,173,760
LDP No limit 0 0 0
IS-IS No limit 0 0 0
RIP No limit 0 0 0
VRRP No limit 1,048,576 1,048,576 96
BGP No limit 2,097,152 2,097,152 1,624,800
Services No limit 2,097,152 2,097,152 1,589,824
IOM No limit 205,226,800 205,226,800 202,962,744
SIM No limit 1,048,576 1,048,576 392
CFLOWD No limit 0 1,048,576 0
IGMP No limit 0 0 0
PIM No limit 0 0 0
ATM No limit 2,872,648 2,872,648 2,790,104
MMPI No limit 0 0 0
MFIB No limit 0 0 0
PIP No limit 79,943,024 79,943,024 78,895,248
MBUF 67,108,864 5,837,328 5,837,328 4,834,280
-------------------------------------------------------------------------------
Current Total Size : 343,495,200 bytes
Total In Use : 324,492,768 bytes
Available Memory : 640,178,652 bytes
===============================================================================
A:ALA-1#
ntp
Syntax ntp
Context show>system
Description This command displays NTP protocol configuration and state.
Output Show NTP Output — The following table describes NTP output fields.
Label Description
Enabled
yes — NTP is enabled.
no — NTP is disabled.
Admin Status
yes — Administrative state is enabled.
no — Administrative state is disabled.
NTP Server
Displays NTP server state of this node.
Stratum
Displays stratum level of this node.
Oper Status
yes — The operational state is enabled.
no — The operational state is disabled.
Auth Check
Displays the authentication requirement