EasyManuals Logo
Home>Alcatel-Lucent>Network Router>7750 SR OS Basic

Alcatel-Lucent 7750 SR OS Basic User Manual

Alcatel-Lucent 7750 SR OS Basic
484 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #443 background imageLoading...
Page #443 background image
System Management
7750 SR OS Basic System Configuration Guide Page 443
Multi-Chassis Statistics, Peer 10.10.10.2
===============================================================================
Packets Rx : 231
Packets Rx Keepalive : 216
Packets Rx Config : 1
Packets Rx Peer Config : 2
Packets Rx State : 12
Packets Dropped State Disabled : 0
Packets Dropped Packets Too Short : 0
Packets Dropped Tlv Invalid Size : 0
Packets Dropped Tlv Invalid LagId : 0
Packets Dropped Out of Seq : 0
Packets Dropped Unknown Tlv : 0
Packets Dropped MD5 : 0
Packets Tx : 235
Packets Tx Keepalive : 216
Packets Tx Peer Config : 3
Packets Tx Failed : 0
===============================================================================
B:Dut-B#
mc-ring
Syntax mc-ring peer ip-address statistics
mc-ring peer ip-address [ring sync-tag [detail|statistics] ]
mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail|statistics] ]
mc-ring global-statistics
Context show>redundancy>multi-chassis
Description This command displays multi-chassis ring information.
Parameters ip-address — Specifies the address of the multi-chassis peer to display.
ring sync-tag — Specifies a synchronization tag to be displayed that was used while synchronizing
this port with the multi-chassis peer.
node ring-node-name — Specifies a ring-node name.
global-statistics — Displays global statistics for the multi-chassis ring.
detail — Displays detailed peer information for the multi-chassis ring.
Output Show mc-ring peer ip-address ring Output — The following table describes mc-ring peer ip-
address ring output fields.
Label Description
Sync Tag
Displays the synchronization tag that was used while synchronizing this port
with the multi-chassis peer.
Oper State
noPeer — The peer has no corresponding ring configured.
connected — The inband control connection with the peer is operational.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent 7750 SR OS Basic and is the answer not in the manual?

Alcatel-Lucent 7750 SR OS Basic Specifications

General IconGeneral
BrandAlcatel-Lucent
Model7750 SR OS Basic
CategoryNetwork Router
LanguageEnglish

Related product manuals