Alcatel-Lucent 7750 SR OS Basic User Manual

Show Commands
Page 460 7750 SR OS Basic System Configuration Guide
Sample Output
*A:SR7# show system sync-if-timing
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM A : Master Locked
Reference Input Mode : Non-revertive
Reference Selected : ref1
Reference Mate CPM
Data within this block represents the status of the timing reference pro-
vided by the Mate CPM. This will be the BITS input from the standby
CPM.
Admin Status
down — The ref1 or ref2 configuration is administratively shutdown.
up — The ref1 or ref2 configuration is administratively enabled.
diag — Indicates the reference has been forced using the force-refer-
ence command.
In Use
Selected — Indicates whether the first/second timing reference
being used by the synchronous timing subsystem.
If it is in use, the frequency offset is indicated.
Not Selected — The first/second timing reference is not being
used by the synchronous timing subsystem.
Qualified for Use
Indicates whether the reference has been qualified to be used as a
source of timing for the node.
Not Qualified Due
To
Indicates the reason why the reference has not been qualified:
- disabled
- LOS
- OOPIR
- OOF
Selected for Use
Indicates whether the method is presently selected.
Not Selected Due
To
Indicates the reason why the method is not selected.:
- disabled
- not qualified
- previous failure
- LOF
- AIS-L
- validating
Interface Type
The interface type configured for the BITS port.
Framing
The framing configured for the BITS port.
Line Coding
The line coding configured for the BITS port.
Label Description (Continued)

Alcatel-Lucent 7750 SR OS Basic Specifications

General

Brand	Alcatel-Lucent
Model	7750 SR OS Basic
Category	Network Router
Language	English