Alcatel-Lucent 7750 SR OS Basic - Page 468

Debug Commands
Page 468 7750 SR OS Basic System Configuration Guide
http-connections
Syntax http-connections [host-ip-address/mask]
http-connections
Context debug>system
Description This command displays HTTP connections debug information.
Parameters host-ip-address/mask — Displays information for the specified host IP address and mask.
ntp
Syntax [no] router router-name interface ip-int-name
Context debug>system
Description This command enables and configures debugging for NTP.
The no form of the command disables debugging for NTP.
Parameters router-name — Base, management
Default Base
ip-int-name — maximum 32 characters; must begin with a letter. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
persistence
Syntax [no] persistence
Context debug>system
Description This command displays persistence debug information.