Clear Commands
Page 476 7750 SR OS Basic System Configuration Guide
port port-id — Clears the specified port ID of the multi-chassis peer.
port lag-id — Clears the specified Link Aggregation Group (LAG) on this system.
all — Clears all ports and/or sync tags.
sync-tag sync-tag — Clears the synchronization tag used while synchronizing this port with the
multi-chassis peer.
application — Clears the specified application information that was synchronized with the multi-
chassis peer.
Values all: All supported applications
dhcp-server: local dhcp server
igmp: internet group management protocol
igmp-snooping: igmp-snooping
mc-ring: multi-chassis ring
mld-snooping: multicast listener discovery-snooping
srrp: simple router redundancy protocol
sub-host-trk subscriber host tracking
sub-mgmt: subscriber management
screen
Syntax screen
Context clear
Description This command allows an operator to clear the Telnet or console screen.
system
Syntax system sync-if-timing {ref1 | ref2 | bits}
Context clear
Description This command allows an operator to individually clear (re-enable) a previously failed reference. As
long as the reference is one of the valid options, this command is always executed. An inherent
behavior enables the revertive mode which causes a re-evaluation of all available references.
trace
Syntax trace log
Context clear
Description This command allows an operator to clear the trace log.
To Next Page
Loading...
