Root Commands
7750 SR OS Basic System Configuration Guide Page 59
port — Clears port statistics.
qos — Clears QoS statistics.
radius — Clears the RADIUS server state.
router — Clears router commands affecting the router instance in which they are entered.
Values arp, authentication, bgp, bfd, dhcp, dhcp6, forwarding-table, icmp-redirect-
route,icmp6, igmp, interface, isis, ldp, mpls, neighbor, ospf, ospf3, pim, rip, router-
advertisement, rsvp
saa — Clears the SAA test results.
screen — Clears the console or telnet screen.
service — Clears service ID and statistical entities.
subscriber-mgmt — Clears subscriber management data.
system — Clears (re-enables) a previously failed reference.
tacplus — Clears the TACACS+ server state.
trace — Clears the trace log.
vrrp — Clears and resets the VRRP interface and statistical entities.
echo
Syntax echo [text-to-echo] [extra-text-to-echo] [more-text]
Context <GLOBAL>
Description This command echoes arguments on the command line. The primary use of this command is to allow
messages to be displayed to the screen in files executed with the exec command.
Parameters text-to-echo — Specifies a text string to be echoed up to 256 characters.
extra-text-to-echo — Specifies more text to be echoed up to 256 characters.
more-text — Specifies more text to be echoed up to 256 characters.
exec
Syntax exec [-echo] [-syntax] {filename | <<[eof_string]}
Context <GLOBAL>
Description This command executes the contents of a text file as if they were CLI commands entered at the con-
sole.
Exec commands do not have no versions.
Parameters -echo — Echo the contents of the exec file to the session screen as it executes.
Default Echo disabled.
To Next Page
Loading...
