ALE M3-M5-M7-M8 DeskPhones Administrator Guide
Features → General → Auto Dial Out Timer
10.7 Anonymous Call
Anonymous call allows the caller to conceal the identity information shown to callee. The callee’s phone LCD
screen prompts an incoming call from anonymity (there is no name, number or other information displayed).
Anonymous calls can be performed locally or on the server. When performing an anonymous call on local,
the IP phone sends an INVITE request message with a call source “From: Anonymous
<sip:anonymous@anonymous.invalid>;tag=878106cc5e”. If performing an anonymous call on a specific
server, you may need to configure the anonymous call on code and off code to activate and deactivate the
function of anonymous call on the server side.
The following table lists the parameters to configure an anonymous call.
Note: X means account ID and it can be number 1~8 for M3/M5/M7, and 1-20 for M8.
AccountXAnonymousCallEnable
It enables or disable the anonymous call feature for account.
true - enable
false - disable
Account → Advanced → Anonymous Call
Menu → Features → Anonymous → AccountX → Anonymous
AccountXAnonymousCallOnCode
It configures the on code for accountX to activate anonymous call feature on the
server side.
Note: The parameter AccountXAnonymousCallEnable must set to true, the phone
will send the on code to server.
String within 32 characters
Account → Advanced → Anonymous Call On Code
Menu → Features → Anonymous → AccountX → On Code
AccountXAnonymousCallOffCode
It configures the off code for accountX to deactivate anonymous call feature on
server side.
Note: The parameter AccountXAnonymousCallEnable must set to false, the phone
will send the off code to server.
String within 32 characters
Account → Advanced → Anonymous Call Off Code
To Next Page
Loading...
