ALE M3-M5-M7-M8 DeskPhones Administrator Guide
Features → General → Call Waiting Tone Enable
It configures the On Code of the call waiting feature. The phone will send on code
number to server to enable call waiting function on server.
String (within 32 characters)
Features → General → Call Waiting On Code
It configures the Off Code of the call waiting feature. The phone will send on code to
server to enable call waiting function on server.
String (within 32 characters)
Features → General → Call Waiting Off Code
10.13 Do Not Disturb (DND)
DND feature enables the phone to reject all incoming calls automatically when you do not want to be
interrupted. You can choose to implement DND locally on the phone or on the server side.
Usually, you can activate DND when the phone is idle. The phone stays in the DND state until you deactivate
DND manually.
10.13.1 DND Settings Configuration
You can change the following DND settings:
• Choose a DND mode. You can configure DND for all accounts (Phone mode) or specific account
(Custom mode).
• The IP phone displays a DND icon on the idle screen or program key for account when the DND
feature is enabled. It helps users to clearly view that DND is activated or not.
The following table lists the parameters you can use to configure DND setting.
It configures the DND mode for the IP phone.
0: Phone. DND feature is effective for the phone system.
1: Custom. You can configure DND feature for each or all accounts.
Features → DND → DND Mode
10.13.2 DND Feature Configuration
After you choose a DND mode, you can configure DND feature for all lines or a specific line. It depends on
the DND mode:
• Phone (default): DND feature is effective for all lines.
• Custom: DND feature can be configured for a specific line or multiple lines.
To Next Page
Loading...
