Network → IP Parameters → IPv6 → DNS2
Note: Only the M8 phone supports the IPv6 configuration in phone web.
Note: If you change this parameter, the IP phone will reboot for the change to take effect.
The M8 phone supports IPv6 configuration in phone web.
2.2 DHCP Options for IPv4
The IP phone can obtain IPv4-related parameters in an IPv4 network via DHCP option.
Note: For more information about DHCP options, refer to RFC 2131 or RFC 2132.
2.2.1 Supported DHCP Options for IPv4
The following table lists common DHCP options for IPv4 supported by the ALE Myriad Series phones.