Alcatel-Lucent ALE M3 - 802.1 x Authentication

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
24
To make VoIP transmissions intelligible to receivers, voice packets should not be dropped, excessively
delayed, or made to suffer from varying delay. DiffServ model can guarantee high-quality voice transmission
when the voice packets are configured to a higher DSCP value.
SIP QoS
SIP protocol is used for creating, modifying, and terminating two-party or multi-party sessions. To ensure
good voice quality, SIP packets emanated from IP phones should be configured with a high transmission
priority.
DSCPs for voice and SIP packets can be specified respectively.
2.9.1 Voice and SIP QoS Configuration
The following table lists the parameters you can use to configure voice QoS and SIP QoS.
Parameter
Setting8021pPriority
config.xml
Description
It configures audio 802.1p priority.
Permitted
Values
[0-7]
Default
5
Web UI
Setting → Audio → 802.1P Priority
Parameter
SettingAudiodiffserv
config.xml
Description
It configures audio TOS/Diffserv.
Permitted
Values
[0-63]
Default
46
Parameter
Setting8021pUserPriority
config.xml
Description
It configures 802.1P User Priority for SIP messages.
Permitted
Values
[0-7]
Default
5
Parameter
SIPDscp
config.xml
Description
It configures TOS/Diffserv for SIP messages.
Permitted
Values
[0-63]
Default
40
2.10 802.1x Authentication
The ALE Myriad Series phones support the following protocols for 802.1X authentication:
• EAP-MD5
• EAP-TLS (requires Device and CA certificates, requires no password)
You can configure the 802.1x feature via Phone UI path:
Menu → Advanced Setting (default password: 123456) → Network → 802.1x