ALE M3-M5-M7-M8 DeskPhones Administrator Guide
Account → Advanced → SRTP Working Mode
5.6 SSH Activation
It is possible to open a secure remote connection through SSH to access the phone for Further operation
test and debug purposes. SSH Connection is disable by default.
The following table lists the parameters you can use to configure the SSH session.
It enables or disable the SSH session.
false - disable
true - enable
Maintenance → Security → SSH Activation
5.7 HTTPS Peer Verification
When the phone downloads the common configuration file from the provisioning server, the IP phone can
enable or disable the authentication of the server certificate based on the trusted certificates list.
The following table lists the parameters you can use to configure the HTTPS peer verification.
DeviceSecurityHttpsPeerVerifyEnable
It enables or disable HTTPS peer verification.
Maintenance → Certificate Management → HTTPS Peer Verify
5.8 Encrypting and Decrypting Files
Myriad IP phones support downloading encrypted config.xml/config.xml file(s) from http/https server. To
encrypt/decrypt files, you may have to configure an AES key.
The following table lists the parameters you can use to configure the encryption and decryption.
DeviceSecurityEncryptionAesKey
It configures the plaintext AES key for encrypting/decrypting the config/config.xml file.
Menu → Advanced Setting (default password: 123456) → Auto Provision → AES Key
To Next Page
Loading...
