Alcatel-Lucent ALE M3 - X-party Conference Calls

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
191
Parameter
ProgramKeyXLabel
config.xml
Description
It configures the programmable key label. X can be number 1~20 for M3 or 1~28 for
M5/M7 and 1~36 for M8.
Permitted
Values
strings
Default
Blank
Phone UI
Select one program key, then long press it for 2s, and input strings for Label to define a
name
Web UI
Phone Keys → Program Key
12.2 X-party Conference
The ALE Myriad Series M3/M5/M7 DeskPhones have the capability to launch a 5-party conference by local.
The M8 phone have the capability to launch a 12-party conference by local.
Note: When the phone audio codec is configured as Opus + Super Wide Band, it only supports 4-party
conference. When the phone audio codec is configured as Opus + Wide Band, it only supports 10-party
conference.
After establishing 3-party conference, users can press ‘Conf’ button to add a new user then press ‘Join’
button to merge the new user to current conference.
The phones support split/remove during conference.
The improvements include:
• Allow an incoming call when there is an active conference
• Split conference to separated hold calls
• Remove conference participants
The menu in conference state has changed. It has 6 menus now and “Split” & “Manage” are added.
12.2.1 X-party Conference Configuration via Web UI
You can configure local conference via the Web UI path: Features → SIP.
M3/M5/M7: The following figure shows the 5-party conference configuration.