Alcatel-Lucent ALE M3 - Call Display; Notification Pop-Ups

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
175
Description
Custom wallpaper image file name
Permitted
Values
String within 64 characters
Default
default.png
Web UI
Settings → Display → Current Wallpaper
11.11.2 Custom Wallpaper Picture Limit
The wallpaper picture format must meet the following requirements:
Phone Model
Format
Resolution
Single File Size
M5/M7
PNG/JPG/JPEG/BMP
320 * 240
1MB
M8
PNG/JPG/JPEG/BMP
800 * 480
1MB
11.12 Call Display
Call Display is used in phone ringing, calling process, hold and other scenarios. This function is mainly used
by users to configure the full name display method according to their own habits.
There are two main configuration items, defined as SettingCallInfoDisplayMode and
SettingCallInfoDisplaySource.
• SettingCallInfoDisplayMode is used for defining the call information display mode.
• SettingCallInfoDisplaySource is used for displaying the priority of the call number.
The following table lists the parameters you can use to configure call display.
Parameter
SettingCallInfoDisplayMode
config.xml
Description
It configures Call Display Part.
Permitted
Values
0: Name Number
1: Number Name
2: Name
3: Number
4: Full Contact Info
Default
0
Web UI
Settings → Call Display → Call Info Display Mode
Parameter
SettingCallInfoDisplaySource
config.xml
Description
It configures Call Display Source.
Permitted
Values
0 - Local Directory → Remote Phone Book → LDAP Directory → Network signaling
1 - Network signaling
Default
0
11.13 Notification Pop-ups
This feature is used to control the popup of a new voicemail and a missed call.
• If the FeatureVmPopupEnable is set to true, the notification of voice mail and missed call will pop up
when the SIP phone misses an incoming call or receives a voicemail.