Alcatel-Lucent ALE M3 - ECO Mode (Only for M8)

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
151
Permitted
Values
[0,9]
Default
1
Web UI
Setting → Display → LED Inactive Level
Phone UI
Menu → Basic Setting → Display → Backlight → LED Inactive Level
Parameter
SettingActiveLedLevel
config.xml
Description
It configures the intensity of the LED backlight when the phone is active.
Permitted
Values
[0,9]
Default
5
Web UI
Settings → Display → LED Active Level
Phone UI
Menu → Basic Setting → Display → Backlight → LED Active Level
Parameter
SettingLedTimeout
config.xml
Description
It configures the delay time (in seconds) to change the intensity of the LED when the IP
phone is inactive.
Permitted
Values
0-Always On
15-15s
30-30s
60-1min
120-2min
300-5min
600-10min
1800-30min
Default
300
Web UI
Settings → Display → LED Timeout
Phone UI
Menu → Basic Setting → Display → Backlight → LED Working Time
11.5 ECO Mode (Only for M8)
The M8 phone supports the ECO (Ecology Conservation Optimization) mode. If the phone is set to ECO mode,
the LED lights on digital keys will be off.
The following table lists the parameters you can use to configure ECO mode.
Parameter
SettingEcoModeEnable
config.xml
Description
It configures whether to enable or disable ECO mode of the M8 phone.
Permitted
Values
true
false
Default
false
Web UI
Settings → Display → ECO Mode
Parameter
SettingEcoModeOffHourTimeout
config.xml