Alcatel-Lucent ALE M3 - Handset;Headset;Speakerphone Mode

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
163
Permitted
Values
Strings
Default
M7 DeskPhone/M8 DeskPhone
Phone UI
Menu → Basic Setting → Bluetooth → Edit My Device Info
Parameter
SettingBluetoothReconnectMode
config.xml
Description
It enables or disables the phone to prompt users to confirm the reconnection request from
the Bluetooth device.
Note: It works only for the M7 phone.
Permitted
Values
0 - no auto-connect
1 - low sensitive auto-connect
Default
1
Phone UI
Menu → Basic Setting → Bluetooth → BT Smart Phone Connected Mode
Parameter
SettingBluetoothEnable
config.xml
Description
It enables or disables the Bluetooth feature.
Note: It works only for the M8 phone.
Permitted
Values
false - disable
true - enable
Default
true
Phone UI
Menu → Basic Setting → Bluetooth → Bluetooth Enable
11.9 Handset/Headset/Speakerphone Mode
The ALE Myriad Series phones support three ways to place/answer a call: using the handset, using the
headset or using the speakerphone. You can choose the frequently used audio device as required.
The following table lists the parameters you can use to configure handset/headset/speakerphone mode.
Parameter
SettingRingDevice
config.xml
Description
It configures the SettingRingDevice.
Permitted
Values
0 - handsfree
1 - headset
2 - handsfree_plus_headset
Default
0
Web UI
Settings → Ringing
Phone UI
Menu → Basic Setting → Sound → Ringing → Ringing Device
You need to press Headset program key to activate/deactivate Headset function for the ALE Myriad Series
phones. If the Headset is in use, Headset icon will be displayed as red.