• If the FeatureVmPopupEnable is set to false, the notification of voice mail and missed call will not
pop up when the SIP phone misses an incoming call or receives a voicemail.
The following table lists the parameters you can use to configure notification popups.
11.14 IME Optimization
In Myriad R120 release, when the user uses an input method other than 123 (eg: abc ABC Abc 2ab...).
The phone provides an input field to prompt the user for the current input character and displays the next few
characters.
11.15 Search Source List in Dialing
Search Source List in Dialing allows you to search entries from the source list when the phone is on the pre-
dialing/dialing screen. You can select the desired entry to dial out quickly.
The following table lists the parameters you can use to configure the search source list.
11.16 Soft Key Layout
Soft key layout is used to customize the soft keys at the bottom of the phone screen for best meeting users’
requirements.
In addition to specifying which soft keys to be displayed, you can also determine their display order. The
configurations for soft key layout are based on call states.
11.16.1 Supported Call States and Soft Keys
The following table lists soft keys available for IP phones in different call states.
To Next Page
Loading...
