ALE M3-M5-M7-M8 DeskPhones Administrator Guide
7. Audio Features
This chapter describes the audio sound quality features and options you can configure for the IP phone.
7.1 Dial Tone
You can configure whether to enable or disable the dialing tone.
7.1.1 Dialing Tone Configuration
The following table lists the parameters you can use to enable or disable the dialing tone.
It enables or disables the dialing tone.
false - disable
true - enable
Features → General → Dialing Tone Enable
7.2 Stutter Tone
The phone can play a specific dial tone when it has new/unreaded voice messages received.
It enables or disables the stutter tone.
false - disable
true - enable
Features → General → Stutter Tone Enable
7.3 Ring Tones
Ring tones are used to play for internal/external incoming calls. You can select a built-in ring tone for the
phone system or specific account registration. To set the custom ring tones, you need to upload the custom
ring tones to the IP phone in advance.
You can also specify a period of time after which the IP phone will stop ringing if the call is not answered.
7.3.1 Custom Ringtone Limit
Wav file 200kb, zip file 1.2M
7.3.2 Ringtone Configuration
The following table lists the parameters you can use to configure ringtone.
It configures internal call ring melody.
String (within 511 Characters)
To Next Page
Loading...
