Alcatel-Lucent ALE M3 - USB Recording; Confidential Dial

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
126
Parameter
FeatureAutoRedialInterval
Note: This feature is only for Myriad phones.
config.xml
Description
It configures the auto redial times when the callee is temporarily unavailable.
The IP phone tries to redial the callee as many times as configured till the callee answers
the call.
Permitted
Values
Integer from 1 to 60
Default
10
Web UI
Features → General → Auto Redial Interval (1~60s)
Phone UI
Menu → Features → Auto Redial
10.23 USB Recording
ALE phones support manual recording during a call or automatic recording once the call is set up. Before
recording, ensure that the USB disk has been connected to the IP phone.
Parameter
FeatureUsbCallRecordingEnable
config.xml
Description
It enables or disables the call recording (using a USB flash drive) feature of the IP phone.
Permitted
Values
false - disable
true - enable
Default
false
Parameter
FeatureAutoRecordingEnable
config.xml
Description
It enables or disables the automatic recording feature of the IP phone.
Permitted
Values
false - disable
true - enable
Default
false
10.24 Confidential Dial
Password dial feature allows the callee number to be partially displayed on the IP phone when placing a call.
The hidden digits are displayed as asterisks on the phone screen. The number in the placed call list is also
partially displayed on the IP phone. This feature is especially useful for users who often place important and
confidential calls.
The following table lists the parameters you can use to configure password dial.
Parameter
FeatureConfidentialDialEnable
config.xml
Description
It configures whether to enable or disable the password dial feature.
Permitted
Values
false - disable
true - enable
Default
false
Web UI
Setting → General → Confidential Dial Enable
Parameter
FeatureConfidentialDialPrefix
config.xml
Description
It configures the prefix of the number that needs to be partially displayed.