Alcatel-Lucent ALE M3 - Page 190

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
190
Web UI
Phone Keys → Program key
Parameter
ProgramKeyXLabel
config.xml
Description
It configures the programmable key label. X can be number 1~20 for M3 or 1~28 for
M5/M7 and 1~36 for M8.
Permitted
Values
strings
Default
Blank
Phone UI
Select one program key, then long press it for 2s, and input strings for Label to define a
name.
Web UI
Phone Keys → Program Key
12.1.4 AudioHub via BT Programmable Key Configuration through Phone UI
After the M7 DeskPhone connects with a mobile phone via Bluetooth, you can make and receive mobile calls
on the IP phone, and hold/retrieve/end mobile calls from the IP phone. You can also use your IP phone as a
Bluetooth speaker for your mobile phone.
When a mobile phone is connected via Bluetooth, the phone UI will generate a mobile account
programmable key automatically. You can also long press a programmable key to manually configure a
mobile account programmable key.
12.1.5 AudioHub via BT Programmable Key Configuration Parameters
The following table lists the parameters you can use to configure the AudioHub function.
Parameter
ProgramKeyXType
config.xml
Description
It configures the programmable key type. X can be number 1~20 for M3 or 1~28 for
M5/M7 and 1~36 for M8.
Permitted
Values
68 - Mobile Account
Default
0
Phone UI
Select one program key, then long press it for 2s, and select Key Type as Mobile
Account.
Web UI
Phone Keys → Program Key