EasyManua.ls Logo

Alcatel-Lucent ALE M3 - Page 107

Alcatel-Lucent ALE M3
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ALE M3-M5-M7-M8 DeskPhones Administrator Guide
107
The IP phones also support 2 methods to activate and deactivate server-side DND feature. They may vary
on different servers.
Prefix mode: (default) The IP phone will send on code or off code to synchronize the status of the
DND between the IP phone and the server.
Subscribe mode: The IP phone will send subscribe message to synchronize the status of the DND
between the IP phone and the server when forward states change. With this phone, you don’t need
to configure on code or off code on IP phone.
10.13.3 DND in Phone Mode Configuration
The following table lists the parameters you can use to configure DND in Phone mode.
FeatureDndEnable
config.xml
It turns on or off the DND feature.
Note: It works only if “FeatureDndMode” is set to 0 (Phone).
false - disable
true - enable: The IP phone will reject incoming calls on all accounts.
false
Features DND Enable DND
Menu Features DND
FeatureDndOnCode
config.xml
It configures the DND on code to activate the server-side DND feature. The IP phone will
send the DND on code to the server when you activate DND feature on the IP phone.
Note: It works only if “FeatureDndMode” is set to 0 (Phone).
String within 32 characters
Blank
Features DND On Code
Menu Features DND On Code
FeatureDndOffCode
config.xml
It configures the DND off code to deactivate the server-side DND feature. The IP phone
will send the DND off code to the server when you deactivate DND feature on the IP
phone.
Note: It works only if “FeatureDndMode” is set to 0 (Phone).
String within 32 characters
Blank
Features DND Off Code
Menu Features DND Off Code

Table of Contents

Related product manuals