ALE M3-M5-M7-M8 DeskPhones Administrator Guide
10.13.4 DND in Custom Mode Configuration
The following table lists the parameters you can use to configure DND in Custom mode.
Note: X means account ID. It can be number 1~8 for M3/M5/M7, and 1-20 for M8.
It turns on or off the DND feature.
Note: It works only if “FeatureDndMode” is set totrue1 (Custom).
false - disable
true - enable: The IP phone will reject incoming calls on all accounts.
Features → DND → Account ID → Enable DND
Menu → Features → DND → Account ID → DND Status
It configures the DND on code to activate the server-side DND feature. The IP phone will
send the DND on code to the server when you activate DND feature on the IP phone.
Note: It works only if “FeatureDndMode” and “FeatureDndEnable2” are both set to 1
(Custom).
String within 32 characters
Features → DND → Account ID → On Code
Menu → Features → DND → Account ID → On Code
It configures the DND off code to deactivate the server-side DND feature. The IP phone
will send the DND off code to the server when you deactivate DND feature on the IP
phone.
Note: It works only if “FeatureDndMode” set to 1 (Custom) and “FeatureDndEnable2” set
to false.
String within 32 characters
Features → DND → Account ID → Off Code
Menu → Features → DND → Account ID → Off Code
10.13.5 DND Synchronization for Server-side Configuration
DND synchronization feature provides the capability to synchronize the status of the DND features between
the IP phone and the server.
If the DND is activated in Phone mode, the DND status changing locally will be synchronized to registered
default accounts on the server.
To Next Page
Loading...
