ALE M3-M5-M7-M8 DeskPhones Administrator Guide
String within 32 characters
Features → Forward → No Reply FWD Phone Number
Menu → Features → Call Forward → No Reply Forward → Forward To
It configures the no answer forward on code to activate the server-side no answer
forward feature.
The IP phone will send the no answer forward on code and the pre-configured
destination number (configured by the parameter “FeatureNoReplyFwdNumber”) to the
server when you activate no answer forward feature on a phone basis.
Note: If the default account is account 2, set the value of the parameter
“FeatureFwdMode to 0 (Phone).
String within 32 characters
Features → Forward → On Code(under No Reply FWD)
Menu → Features → Call Forward → No Answer Forward → On Code
It configures the no answer forward off code to deactivate the server-side no answer
forward feature. The IP phone will send the no answer forward off code to the server
when you deactivate no answer forward feature on the IP phone.
Note: If the default account is account 2, set the value of the parameter
“FeatureFwdMode” to 0 (Phone).
String within 32 characters
Features → Forward → Off Code (under No Reply FWD)
Menu → Features → Call Forward → No Reply Forward → Off Code
FeatureNoReplyFwdDuration
The incoming calls will be forwarded when not answered after M (M is configurable by
“FeatureNoReplyFwdDuration”) seconds.
Features → Forward → Forward Duration Noreply (under No Reply FWD)
10.14.4 Call Forward in Custom Mode Configuration
The following table lists the parameters you can use to configure call forward in Custom mode.
Note: X means account ID. It can be number 1~8 for M3/M5/M7, and 1-20 for M8.
To Next Page
Loading...
