Alcatel-Lucent ALE M3 - Page 133

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
133
Autop Finish
When the IP phone completes auto provisioning via power on.
Headset
When the IP phone presses the HEADSET key.
Handfree
When the IP phone presses the Speakerphone key.
Peripheral Information
When the accessory is unplugged or plugged.
VPN IP
When the phone IP address assigned by the VPN server changes.
Reboot
When the IP phone starts reboot.
Reset
When the IP phone starts reset.
Screen Active
When the IP phone screen is active.
Screen Inactive
When the IP phone screen is inactive.
Conference Established
When the IP phone establishes a conference.
10.26.2 Variable Values List
The following table lists pre-defined variable values.
Variable Value
Description
$mac
The MAC address of the IP phone.
$ip
The IP address of the IP phone.
$model
The IP phone model.
$firmware
The firmware version of the IP phone.
$active_url
The SIP URI of the current account when the IP phone places a call,
receives an incoming call or establishes a call.
$active_user
The user part of the SIP URI for the current account when the IP phone
places a call, receives an incoming call or establishes a call.
$active_host
The host part of the SIP URI for the current account when the IP phone
places a call, receives an incoming call or establishes a call.
$local
The SIP URI of the caller when the IP phone places a call.
The SIP URI of the callee when the IP phone receives an incoming call.
$remote
The SIP URI of the callee when the IP phone places a call.
The SIP URI of the caller when the IP phone receives an incoming call.
$display_local
The display name of the caller when the IP phone places a call.
The display name of the callee when the IP phone receives an incoming
call.
$display_remote
The display name of the callee when the IP phone places a call.
The display name of the caller when the IP phone receives an incoming
call.