Alcatel-Lucent ALE M3 - Page 171

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
171
Parameter
DynamicKey***Label
config.xml
Description
It configures the label displayed on the phone screen for a specific programmable key.
This is an optional configuration.
Permitted
Values
String within 64 characters
Default
Blank
Web UI
Phone Keys → Dynamic key
Parameter
DynamicKey***Number
config.xml
Description
It configures the value for some programmable key features.
Permitted
Values
String within 64 characters
Default
Blank
Web UI
Phone Keys → Dynamic key
Parameter
DynamicKey***Extension
config.xml
Description
This configuration is not applicable for programmable hard key types.
Permitted
Values
String within 64 characters
Default
Blank
Web UI
Phone Keys → Dynamic key
The Key Names supported are listed as follows:
Note: For M8, conference hard key is replaced by headset key. And VolUp/ VolDown keys are not available
for M8.
Key Name
Default Type
Default
Account
Default
Label
Default
Number
Default
Extension
Redial
N/A
1
Release
N/A
1
Hold
N/A
1
Mute
N/A
1
Transfer
N/A
1
Message
N/A
1
Conference
N/A
1
Handsfree
N/A
1
Headset
N/A
1
Up
N/A
1
Down
N/A
1
Left
N/A
1
Right
N/A
1