ALE M3-M5-M7-M8 DeskPhones Administrator Guide
12.8.6 Group Pickup Configuration Parameters
The following table lists the parameters you can use to configure one softkey to perform group pickup
function.
It configures the programmable key type. X can be number 1~20 for M3, 1~28 for
M5/M7 and 1~36 for M8.
Select one program key, long press it for 2s, and select Key Type as GrpPickup.
It configures the account index of program key. X can be number 1~20 for M3, 1~28
for M5/M7 and 1~36 for M8.
1~8
Note: For M8, the value can be 1~20.
Select one program key, long press it for 2s, and select the account intended to use
GrpPickup.
It configures the programmable key label. X can be number 1~20 for M3, 1~28 for
M5/M7 and 1~36 for M8.
To Next Page
Loading...
