Alcatel-Lucent ALE M3 - Page 21

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
21
2.7.1 Supported Transmission Methods
Three methods of configuration transmission for IP phone Internet port and PC port:
• Auto-negotiate
• Half-duplex
• Full-duplex
Auto-negotiate is configured for both Internet port and PC port on the IP phone by default.
2.7.2 Internet Port and PC Port Configuration
The following table lists the parameters you can use to configure Internet port and PC port.
Parameter
DeviceNetworkLanAutoEnable
config.xml
Description
It configures the transmission method for Internet port.
Permitted
Values
false - disable
true - enable
Default
true
Web UI
Network → Port → LAN Auto
Phone UI
Menu → Advanced Setting (default password: 123456) → Network → Ethernet → LAN →
Auto
Parameter
DeviceNetworkLanSpeed
config.xml
Description
It configures the transmission method for Internet port.
Note: It works only if “DeviceNetworkLanAutoEnable” is set to false.
Permitted
Values
10
100
Default
1000
Web UI
Network → Port → LAN Speed
Phone UI
Menu → Advanced Setting (default password: 123456) → Network → Ethernet → LAN →
LAN speed
Parameter
DeviceNetworkLanDuplexType
config.xml
Description
It configures the transmission method for Internet port.
Note: It works only if “DeviceNetworkLanAutoEnable” is set to false.
Permitted
Values
Half
full
Default
half
Web UI
Network → Port → Lan Duplex
Phone UI
Menu → Advanced Setting (default password: 123456) → Network → Ethernet → LAN →
LAN duplex
Parameter
DeviceNetworkPcAutoEnable
config.xml
Description
It configures the transmission method for PC port.
Permitted
Values
false - disable
true - enable