ALE M3-M5-M7-M8 DeskPhones Administrator Guide
It configures the call park method.
0 - Direct call
1 - Blind transfer call
12.9.4 Retrieve Park configuration parameters
The following table lists the parameters you can use to configure one softkey to perform retrieve park
function.
It configures the programmable key type. X can be number 1~20 for M3, 1~28 for
M5/M7 and 1~36 for M8.
Select one program key, long press it for 2s, and select Key Type as Retrieve.
It configures the account index of program key. X can be number 1~20 for M3, 1~28
for M5/M7 and 1~36 for M8.
1~8
Note: For M8, the value can be 1~20.
Select one program key, long press it for 2s, and select the account intended to use
Retrieve.
It configures the programmable key label. X can be number 1~20 for M3, 1~28 for
M5/M7 and 1~36 for M8.
Select one program key, long press it for 2s, and input a label name.
To Next Page
Loading...
