Alcatel-Lucent ALE M3 - Page 34

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
34
Parameter
DeviceProvisionFileFirst
config.xml
Description
It configures the first requested configuration file.
Permitted
Values
String within 511 characters
Default
config.xml
Parameter
DeviceProvisionFileSecond
config. xml
Description
It configures the second requested configuration file.
Permitted
Values
String within 511 characters
Default
config.$model.xml
Parameter
DeviceProvisionFileThird
config.xml
Description
It configures the third requested configuration file.
Permitted
String within 511 characters
Values
Default
config.$mac.xml
When the phone is performing the auto provisioning process via a relative URL, the phone will request the
following three default configuration files in turn.
• config.xml
• config.$model.xml
• config.$mac.xml
If you want to customize the configuration file, you can create some new files by making a copy and
renaming the configuration template file, then save the configuration file and place it on the provisioning
server. The IP phone will request the customized file.
For example, set the DeviceProvisionFileFirst to 1.xml, set the DeviceProvisionFileSecond to 2.xml, and
set the DeviceProvisionFileThird to 3.xml, the phone will request the following three configuration files in
turn.
• 1.xml
• 2.xml
• 3.xml
Note: The ALE Myriad Series phones only support the xml format config file.
3.6.3 Timeout Mechanisms
In the process of auto provisioning, there are two kinds of timeout mechanisms for some abnormal
scenarios. It provides a clearer definition of some behaviors of the phone when there are network issues and
can also improve the efficiency of the auto provisioning process.
The following table lists the parameters you can use to configure the settings of timeout in auto provisioning
process.
Parameter
DeviceNetworkConnectExpiredTime
config.xml