Alcatel-Lucent ALE M3 - Page 78

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
78
9
Bellcore-dr9
ring09
10
Bellcore-dr10
ring10
11
Bellcore-dr11
ring11
12
Bellcore-dr12
ring12
13
Bellcore-dr13
ring13
14
Bellcore-dr14
ring14
N<1 or N>15
ring00
Examples:
Alert-Info: test/Bellcore-dr1
Alert-Info: Bellcore-dr1
Alert-Info: Bellcore-dr1;x-line-id=1
7.4.1.2 Alert-Info: Ringtone
When the Alter-Info header contains the keyword “ringtone-N/ringtone-RingN” or
“MyMolodyN/MyMelodyRingN”, the IP phone will play the corresponding local ring tone (RingN.wav), or play
the first local ring tone (Ring1.wav) in about 10 seconds if “N” is greater than 15 or less than 1.
Examples:
Alert-Info: ringtone-2
Alert-Info: ringtone-Ring2.wav
Alert-Info: ringtone-2;x-line-id=1
Alert-Info: MyMelody2
Alert-Info: MyMelodyRing2.wav
Alert-Info: MyMelody2;x-line-id=1
The following table identifies the corresponding local ring tone:
Value of N
Ring Tone
0
ring00
1
ring01
2
ring02
3
ring03
4
ring04
5
ring05
6
ring06
7
ring07
8
ring08
9
ring09
10
ring10
11
ring11