Alcatel-Lucent ALE M3 - Page 89

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
89
Web UI
Account → Basic → SIP Server Port
Parameter
AccountXOutboundProxy1Address
config.xml
Description
It configures the IP address or domain name of the outbound proxy server.
Permitted
Values
String within 256 characters
Default
Blank
Web UI
Account → Basic → OutBound Proxy Address
Phone UI
Menu → Advanced Setting (default password: 123456) → Account → AccountX →
Outbound proxy1
Parameter
AccountXOutboundProxy1Port
config.xml
Description
It configures the port of the outbound proxy server for accountX.
Permitted
Values
Integer from 0 to 65535
Default
5060
Web UI
Account → Basic → OutBound Proxy Port
Parameter
AccountXServer1Expire
config.xml
Description
It configures the registration expiration time (in seconds) of SIP server for accountX.
Permitted
Values
Integer from 60 to *
Default
3600
Web UI
Account → Basic → Register Expire Time
8.1.3 Registration Settings Configuration
The following table lists the parameters to configure the registration settings:
Note: X means account ID. It can be number 1~8 for M3/M5/M7, and 1-20 for M8.
Parameter
AccountXSendUserPhoneEnable
config.xml
Description
It enables or disables the IP phone to add “user=phone” to the SIP header of the INVITE
message.
Permitted
Values
false - disable
true - enable
Default
false
Web UI
Account → Advance → Send User=Phone
Parameter
AccountXServerType
config.xml
Description
It configures the type of the SIP server.