- Programmable keys with:
• 72 keys on the main (perso) page
• Up to 42 additional programmable keys located on add-on keypad modules
1.4.1 Softkeys (Dynamic Feature Keys)
Two sets of five softkeys are located on both sides of the set display.
Figure 1.8: softkeys Location
Softkeys are dynamic keys whose function is determined by the system according to the
current status. They cannot be programmed by the user.
A feature is activated by pressing the softkey corresponding to the label displayed on the
screen. Pressing a softkey for which no label is displayed has no effect.
table 1.2: Call Handling Softkeys
Softkey (Label) Press, to:
Release Release the current call
Ring Call the selected set
Broker Switch between two users in conversation (the other party is auto-
matically put on hold)
Intrude (i.e. barge-in) Barge in a conversation between two users
Intrude Off End intrusion in a conversation
Transfer Transfer the first party to the second (consultation call)
Transfer off Deactivate temporarily the Auto transfer feature for the current call
Hold Put the party on hold
Override Call a set in immediate forward. This feature allows to override the
immediate forward and call the initial set
Follow Forward Call a set in forward on no reply. This feature allows to follow the
forward and call the forwarding destination set
Forward attendant Forward a call to another attendant (or attendant group)
Meet Me Conf Add users to a Meet Me conference
!$
! "
1-7
To Next Page
Loading...
