on the telephone area (only one digit at the same time).
Figure 3.9: Telephone Area Example (DTMF dialing)
Press the DTMF off softkey to deactivate the DTMF transparency.
3.4 Sending a Calibrated Cut-Off or Flash
This feature sends a calibrated cut-off or flash on the line before sending dialed digits in
transparency mode.
Pressing the Flash softkey sends a calibrated pulse to the remote piece equipment. this
remote equipment can then return a tone inviting the attendant to continue dialing.
3.5 Temporary Hold of Automatic Transfer
If the automatic transfer mode is activated, the current call is automatically transferred to a free
user after the attendant has dialed the user number.
Note:
The Auto transfer feature is enabled when, in the main (perso) page, the checkbox next to the Auto
transfer label is validated.
When receiving an external call while the Auto transfer feature is enabled, the screen
displays:
$$ %!#
! "
3-5
To Next Page
Loading...
